Hopewind PV Products-Hopewind

Performance characteristics

Modular Design

Easy maintenance, good parallel characteristics, easy system expansion

Power Grid Adaptability

Wide voltage, frequency adaptability,support low short-circuit ratio weak power grid operation

Wide Range of Voltage Regulation

Supports 0-1500Vdc output

Strong Ability to Adapt to Environment

Air cooling heat dissipation, independent air duct design, high reliability

High Power Factor

Power factor ≥0.99, with reactive power compensation capability

Lower Harmonic

With harmonic suppression function, AC side Thui < 3%, grid friendly

main parameters

Product		AC/DC+DC/DC Two-stage Topology Series
DC Parameters	Output Voltage Range	0V~1500V
	Output Current Range	0A~20000A
	DC Voltage Ripple	≤1%
	DC Stabilized Current Precision	±1% (steady state)
	DC Stabilized Voltage Precision	±1% (steady state)
	Load Response Time	<0.1s (0%~100% load, running state)
	Output Control Mode	Current control (default), Voltage control, Power control
AC Parameters	Input AC Voltage Range	100V~1140V
	Rated Operating Frequency	50Hz / 60Hz
	Rated Power Factor	>0.99 (over 30%P_N)
	Adjustable Power Factor Range	-0.95Lead~0.95Lag
	Allowable Grid Frequency Deviation	±10%
	Allowable Grid Voltage Deviation	±10%
	Total HarmonicDistortion Rate of Grid- connected Current	<3% (over 30%P_N)
	Access Method	3-phase 3-wire+PE
System	Wiring In / Out Mode	In: top / bottom, Out: top / bottom
System	Efficiency	≥97%
Environmental Requirements	Cooling Method	Temperature-controlled air cooling / Liquid cooling
	Working Temperature Range	-40°C~+55°C
	Electromagnetic Environment Category	Class A
	Relative Humidity	0%~95% (no condensation)
	Enclosure Protection Rating	IP23 / IP54
	Highest Altitude of Installation Site	4000m
External Communication	External Communication Interface	RS485, Ethernet and 4mA~20mA digital analog, etc.
External Communication	External Communication Protocol	Modbus RTU, Modbus TCP
Display	HMI	Touch screen (optional)