Hopewind PV Products-Hopewind

It can realize the networking monitoring of the wind power converter Through the optical fiber ring network and server of the wind power station. On the premise of ensuring the safety of power operation, a large number of high-resolution real-time data collected by the converter are used to realize the fine monitoring and intelligent diagnosis of the wind turbines, to maximize the operation and maintenance level of the wind power station, reduce the downtime of wind turbines, decrease the loss of power generation and improve its power generation efficiency.

Performance characteristics

Maintenance cost reduction

While reducing the product maintenance cost, it can improve the portability and operation experience of the industrial field products

Easy to use

It can realize bridging, protocol conversion, centralized monitoring and friendly human-machine interaction (HMI ) between different physical communication interfaces

Good applicability

It can flexibly realize remote data monitoring of the converter (inverter/frequency converter)

main parameters

Index	Value	Description
Processor platform	I.MX257	Kernel: ARM926EJ-S; 32 bits; Main frequency: 400MHz; Memory: 32M bytes; Expandable memory: 64M bytes; NorFlash 8M+8M
Operating system and software	OS	Real-time Linux, 2.6. x kernel
	File system	Support JFFS2, FAT32, EXT2, NFS and other file systems
	Remote access support	HTTP, TELNET, supporting Web server and CGI
	Protocol support	Support the complete TCP/IP protocol stack; NTP network clock synchronization protocol; By selecting different modules, support the bus protocols, including CanOpen, ModBus, ProfiBus, DeviceNet, ControlNet, CC Link, BACNet, CompoNet, LonWorks, Industrial Ethernet EtherCAT, ProfiNet, PowerLink and SERCOS, etc.)
Max. power consumption	＜6W	/
Operating temperature	-30℃ - +50℃	Natural cooling
Storage temperature	-40℃ - +70℃	/
Altitude	0 - 4000m	/
Mean time between failures	＞18000小时	Rated operating environment
Main functional interfaces	Ethernet	10/100M adaptive Ethernet network communication interface
	USB	USB 2.0 Host interface
	Fiber	Monitoring software detects the optical fiber interface of the converter/inverter.
	FX	10/100M adaptive optical Ethernet network communication interface
	ProfiBus	ProfiBus DP Slave communication interface: max. baud rate: 12Mbps
	CAN	CAN communication interface: max. baud rate: 1Mbps
	RS485	RS485 communication interface: max. baud rate: 921600bps
	Console	USB Device interface: Console, baud rate 115200bps serial port console
	FX	10/100M adaptive optical Ethernet network communication interface
	WiFi	Max. Speed: 150Mbps; Communication distance: 50m (no shelter, open ground)